Bio-Static Antimicrobial Solid State additives
For Food Processing, Storage, Transportation and Packing Solutions
GERM FREE Bio-Static Antimicrobial Surfactant Films, Emulsions And Surface Coverings Are Designed For use in the The Food Industry, In Printing, Processing Facilities, Packaging, Storage Systems And The Fabrication Of Materials There For,
Germ Free bio-static Antimicrobials Function As Super Charged Bacteria, Mold And Algae Killers.
USES FOR GERM FREE ANTIMICROBIAL ADDITIVES:
PLASTICS…………………… (POLYSTYRENE / PET)
CARDBOARD………………. .(NATURAL FIBERS)
FABRICS…………………….. (NYLON/ COTTON/ SILK)
PRINTING MEDIA…………... (INKS / DYES)
PAINTS………………………. (LATEX AND POLYMER)
WAXES………………………. (NATURAL AND PETROLEUM)
BUILDING MATERIALS …..... (CEMENT, WOOD, DRYWALL ETC.)
FIBERGLASS / RESINS / EPOXIES / GEL-COTE
FOOD PROCESSING SURFACES, EQUIPMENT, MACHINERY AND FACILITIES.
Different Specific Packaging Materials And Final Usage Regulatory Compliancy Requirements
Will Vary The GERM FREE Composition For Additives Or Emulsions
Their Usage Or Application Protocol Design When Conforming To EPA - FDA Or National PPM Threshold Limits.
Germ Free Provides
The Correct Registration, Usage Labeling And Use Instructions (Protocols) With Certified MSDS’s
Laboratory Services To Ensure The Correct Monitoring And Management Of Bacteria, Mold, Algae, Fungi And Toxins.
Food And Product Packaging, Transportation And Processing Facilities Microbial Solutions As Well As In Final Food Outlets,
Shelf Life Extension And Product Quality Along With The Added Value.
All PPM And Usage Protocol Guidelines
Set By The EPA - FDA And National / International Food & Health Administrations Have Been Extensively Researched, Trialed And Verified.
Registered FDA And International Toxicology Lab Reports Are Available To Meet All Regulatory Requirements,
Registration Of Individual Products Per Usage And The Generation Of Individual MSDS’s And Transportation Documentation And Labeling Therefore.
This Research And Work We Have Already Done, And-Or, Are Capable Of Performing For New And -Or Different Specific Industries Or Products.
GERM FREE Antimicrobials Are Designed
To Target Bacteria Where And When Needed And For The Specific Time Periods Required
Enabling The Elimination Of Bacteria Build Up In Food Production Facilities, Farms Or Abattoirs To Supermarket Shelfs,
Ensuring A Healthy And Balanced Approach To Produce And Product Quality Management.
This Technology In Combination With Our Mobile Testing Team And Internationally Accredited Laboratories Allow For Total Control And Monitoring Of Produce Import Values, Costs And Spoilage.
In Comparison With Other Chemicals Or Biological Processes
GERM FREE Antimicrobials Has The Advantage Of Being Able To Remove Pathogens At Low Concentrations
And Show High Adsorption Capacity For Bacteria, Organic Matter And Anions.
It Is Also NON-TOXIC, Eco-Friendly And Bio-Degrades Into Basic Elements.
GERM FREE Bio-Static Emulsions, Additives And Surfactant Solutions
Can Be Integrated Into The Manufacturing Process Of All Containers And Food Wrappings.
These Solutions Can Be Tailored To Offer Surface Antimicrobial Efficacy Rates Of Up To 99.99%
Efficacy Longevity Can Be Designed To Last From 1 Week To 5 Years.
When Introduced Into Extruded Plastics In The Manufacturing Process The Antibacterial Function Lasts As Long As The Product Itself.
Each GERM FREE Antimicrobial Solution Is Specifically Designed To Individual Manufacturers Line Production Machinery Requirements And End Client Needs.
by Germ Free
Antimicrobial active compound
Staphylococcus aureus Elimination by Germ Free Antimicrobial active compound on Skin Pathogens Reported in # Viable Cells/ ml (Shake Flask Test)
Germ Free Antimicrobial ‘Polymer Guard” is a totally unique anti microbial product. It should not be compared to other antimicrobial products for 10 key reasons:
1. Germ Free Does Not Kill Bacteria By Poisoning.
This Means That There Is No Possibility Of Bacteria Building Up Any Immunity (No Super-Bugs).
2. Germ Free Is Colourless And Odourless.
This Means That There Are No Unpleasant Odours / No Stains.
3. Germ Free Antimicrobial Kills Mechanically:
This Means That When Germ Free Is Applied (And Allowed To Dry)
It Leaves A Thin Bonded Film That Resembles Millions Of Sword Shaped Road Spikes – Spikes That Attract And Kill Bacteria.
Because Germ Free Does Not Change During This Process, One Single Application Can Last For A Month Or More (Depending On The Surface And The Application).
4. Germ Free Antimicrobial Lasts Longer Than Chemical Products:
Chemicals Are Effective Until Such Time That The Surface Is Contaminated Again.
This Can Occur Immediately – Even Something As Innocent As A Hand Touching The Surface Can Re-Contaminate The Area With Bacteria.
5. Germ Free Antimicrobial Is Safe To Use:
Germ Free Antimicrobial Active Compound Has FDA Recognition, EPA, TGA And ERMA Registrations Plus REACH, ECHA, NZFSA Approvals
As Such Is Safe To Humans And Animals Alike.
It Has A Similar “Toxicity” Rating To Vitamin C.
6. Germ Free Antimicrobial Is Non Toxic And Environmentally Friendly:
Germ Free Is Made From Raw Organic Compounds.
There Is No Harm To Drains / Waterways If Germ Free Enters The System.
In Fact, Germ Free Helps With The Water Treatment Process.
7. Germ Free Antimicrobial Does Not Leach Out Of Or Off Coated Products Or Surfaces.
Because There Is No Leaching (Once Dried, There Is No Transfer From Surface To Surface),
Germ Free Is Not Only Food Safe But Safe For Use Within Critical Hygiene Areas Within Child Care, Aged Care Centres And Hospitals.
8. Germ Free Antimicrobial Has Been Extensively Tested:
These Tests Have Been Conducted At Several Universities And Laboratories Within The USA, Australia And New Zealand.
As Such, All Claims / Test Results Are Proven, Verified And Documented.
9. Germ Free Antimicrobials Are Ready To Use.
All Products Are Ready For Application And Do Not Require Mixing Or Diluting. For Best Results, Apply Either As A Spray & Wipe Or Via A Fogging (Misting) Application.
Depending On The Amount Applied, Germ Free Dries In A Matter Of Minutes.
10. Germ Free Has A Proven Track Record :
Against Bacteria, Mould, Fungi And Viruses.
A Complete List Of Tested Products Is Available
The Above Chart Shows
the effectiveness of the Germ Free active compound against
Two samples of pigskin (#2 & 4) were treated with Germ Free Antimicrobial active compound and allowed to dry. Two additional samples of identical
pigskin (# 1 & 3) were untreated. The treated and untreated samples were exposed to the bacteria Staphylococcus aureus and samples taken and analysed at identical times.
The testing indicated that the Germ Free active ingredient killed all of the bacteria whereas the untreated skin actually allowed the bacteria to increase in population. It should also be noted that the small (~1 sq. in.) of treated pigskin destroyed all S. aureus in the 100 ml. test solutions: 280,000,000 and 500,000,000 bacteria.
This demonstrates the ability of the Germ Free Antimicrobial active compound to destroy large concentrations of bacteria without being depleted or losing its antimicrobial activity.
This test would be similar to swirling a finger treated with Germ Free Antimicrobial “Once-A-Month” active compound in a broth of S. aureus and killing all the bacteria. It should be emphasized that the Germ Free active compound destroys pathogens by a process called lysis, which is the piercing or disruption of the pathogens cell wall membrane.
This is unlike the action of antibiotics on the market today which function by binding to the cell or through cellular assimilation to produce cellular death. The lysis of cellular membranes is effective against all types of Staphylococcus aureus, including the drug resistant types such as MRSA.
The process of cellular disruption does not increase or promote drug resistance in the contacting pathogens.
For Product inquiries - To order now:
Simply dial (+27) 079 224 - 0136 and speak to a representative.
Please be ready to take down EFT payment information and have your product name or code and quantity required.
All products are shipped within 48 hours of order placement
Minimum order value is R 500.oo
Over R 2,000.oo Less - 10%
Over R 5,000.oo Less - 15 %
Over R 10,000.oo Less - 20%
Note to Wholesale Customers:
Although we have additional discounts on purchase values, we have already included volume price breaks in our pricing structure.
Bulk pack (1 litre - 5 litre) presentations are designed for decanting and reformulation into hand-sanitizers, hand-creams, waxes etc.
High concentration emulsions and powders are available on request and can be formulated as required.
Call us for preparation instructions for your product.